How to install Windows 7 via USB stick

During this time I have tried to find information on how to install Windows 7 via flash, and finally succeeded well, although the process is running a little slow and I think guns are going too ya can install via USB flash, baru2 has many articles that discuss cara2 install windows via USB flash, and I do not think it's worth trying another trick, who knows there is an increase in speed penginstallannya.

Installing Windows via USB flash turned out a lot of advantages compared to the CD or DVD disk, we do not have to worry about CDs or DVDs that guns are the same kebaca CD / DVD-ROM, CD or DVD is scratched, sometimes complicate the process of installing Windows, while stick through itself, it was necessary that such guns happen again.

I'll show you 2 (manually and automatically) to install Windows 7 via USB stick

Before we begin, need to be prepared is: At least 1buah stick with 4Gb capacitance ato more, because Windows 7 at least take place at 3Gb.

How to Manual:

1. Plug the USB flash disc. (Enter into the usb port well, do not to another place).
2. Button Press WIN + R, type cmd and click OK.
3. Type diskpart and press ENTER.
4. Type list disk, press ENTER and choose which one is your USB drive, make no mistake hati2 later salah2 select which keformat is another disk. if you have only one hard drive USB eat flaskdisknya is disk1.
5. Type select disk 1 and press ENTER.
6. Type clean and press ENTER.
7. Type create partition primary and then press ENTER.
8. Type select partition 1 and press ENTER
9. Type active and press ENTER.
10. Type format fs = fat32 and press ENTER
11. Type assign and press ENTER
12. Type exit and press ENTER.
13. Insert the Windows 7 DVD disc and copy all the contents of the DVD to a USB flash disc earlier.
14. Boot your computer through a USB stick, bios settings malalui your computer, make sure his boot through the USB stick, if langkah2nya true, then the windows installation process should run through the USB stick.

How to Automatic.

How automatic is certainly my choice, and it is readily available to a program whose name WinToFlash, the program will perform a manual way langkah2 as above, that we need to do is run the program, select source and windows 7 way USB flash.

1. Download the latest version of WinToFlash program first. (Download link at the end of the article)
2. Extract and run the file WinToFlash.exe
3. Click the "Check" and run the Windows setup transfer wizard.
4. Click "Next"
5. Select the file location and the location of the Windows 7 USB flash disc. click "Next".
6. Select "I Accepted the terms of the license agreement" and click "Continue"
7. Click OK to start formatting the USB stick and file2 Windows 7 will automatically be inserted into the USB stick.
8. Click "Next" when finished pengopian, and bootinglah your computer via the USB stick before. langkah2nya if true, then the windows installation process should run through the USB stick.

Another way specific to Windows 7 can use tools from Microsoft, the Windows 7 USB / DVD Download tool.

After download and install, start the program, in step 1 select the location of the file. Iso windows7 us, then step 2 select whether to install usb flash tau to burn to DVD disc.
Recently, I discovered another new software to make flash us into the CD / DVD, flash utility is changing us into the installer for windows vista and windows 7. Way to wear it is quite easy, just select the location and source of our flash drives CD / DVD windows vista or windows 7 us.

As another way to make us flasdisk to be used to install windows 7 is by using a tool called EasyBCD, langkah2nya following:

1. For those who have not had the EasyBCD program, please download link at the end of this article:
2. Then plug it into the USB port flash disc computer, then format the partition using the FAT32 was
3. Run EasyBCD program and click the "Bootloader Setup" in the left panel.


4. Under the "Create Bootable External Media", choose the flash that we will create to install windows 7.
5. Then click the "Install BCD" and wait until the following dialog box:

Click the "Yes" and then close the program EasyBCD, then insert the Windows 7 DVD into your computer / laptop.

6. After that, copy all the contents of the DVD windows 7 had to flash that we have prepared earlier, if you have a file. Iso windows 7, first extract to a folder that we have set, then new in flash disc copy to earlier.
7. Done, now flasdisknya can already be used to install windows to a laptop / computer.

Similarly, new tricks to make our fd to be using that to install windows.
And to test whether the usb pendrive or DVD disk windows we succeed or guns to use programs / tools MobaLiveCD.

Windows 8 has been released by microsoft (beta) Please also see how to install Windows 8 via USB stick
How to install Windows 8 Through USB stick