Wireless Point-to-Point Mikrotik
- Wireless Point-to-Point is a wireless communication connection
between two points, where the host is connected only with one client. Wireless Point-to-Point (P2P) using two Mikrotik Mikrotik + Directional Antenna (Grid, Yagi, Sectoral, etc.). Application of Wireless Point-to-point on Mikrotik RouterOS license requires a minimum of level 3 in bridge mode - station.
The device used is Mikrotik Mikrotik Outdoor which has resistance to a
wide range of weather conditions, for example using the RB 433. Mikrotik
will later be installed in the tower of his communication with
directional antenna. For installation Mikrotik and its own antenna must consider the condition of the surrounding environment.
Line of Sight
Line of Sight (LoS) is a straight path between the sender (transmitter) and receiver (receiver) that is free of obstructions.
So the air path between the AP and the client as much as possible that
nothing is blocking, such as buildings, trees, hills, etc.. If there is a barrier then the Wi-Fi connectivity will not be maximized, will not even be able to connect.
Fresnel Zone
Fresnel Zone is the area around a straight line between the antenna (LoS) is used as a medium frequency propagation. In addition to the barrier-free LoS, Fresnel Zone area is also as much as possible its not too much of a barrier.
For more details, please see the following picture:
Antenna Alignment
Antenna Alignment is the direction of the antenna used. Antenna client should lead to the AP antennas, and vice versa.
The angle and direction of the antenna must also be considered, because
if it does not lead to better then the signal will not be received with
the maximum.
Mikrotik 1 as an Access Point (AP)
In Mikrotik 1 is used as an AP with Bridge mode. Why is Bridge? Because of the Point-to-Point only two-way communication occurs only between the AP and the client. If the Client is more than one means that including Point-to-Multipoint. Well, Bridge mode allows only one client alone who can connect to the AP.
Mikrotik 2 as a Client
Client connected to the AP via Wireless use Station mode. At Station usual mode does not support L2 bridging, so it can not be used to make the network transparent wireless bridge. If you use a regular Station mode then must use routing, instead of her bridge.
